Reply to this Thread Reply to this Thread Search Forum Search Forum Back to Thread List Back to Thread List

Permlink Replies: 7 - Last Post: Nov 10, 2009 1:08 PM Last Post By: aspiring_design... Threads: [ Previous | Next ]
aspiring_design...

Posts: 4
Registered: 11/06/09
IGES export needed
Posted: Nov 6, 2009 8:25 AM
  Click to reply to this thread Reply
Attachment TR BODY.ZIP (656.8 KB)
Hello,

Can somebody please convert the attached AutoCad drawing to IGS? We need to get this box manufactured and the mould maker has asked for IGS models. Thanks a lot in advance.

Shahbaz
Jason Rhymes
Re: IGES export needed
Posted: Nov 6, 2009 3:05 PM   in response to: aspiring_design... in response to: aspiring_design...
  Click to reply to this thread Reply
The zip file is corrupted.

--

Jason Rhymes
3D Solid Power Toys
Multi Solid Stretch
http://www.acadianagraphics.com



"aspiring_designer1" wrote in message
news:6284654@discussion.autodesk.com...
Hello,

Can somebody please convert the attached AutoCad drawing to IGS? We need to
get this box manufactured and the mould maker has asked for IGS models.
Thanks a lot in advance.

Shahbaz
aspiring_design...

Posts: 4
Registered: 11/06/09
Re: IGES export needed
Posted: Nov 7, 2009 8:17 AM   in response to: Jason Rhymes in response to: Jason Rhymes
  Click to reply to this thread Reply
Attachment TR BODY(3D ONLY).zip (655.5 KB)
Oops! You are right buddy. That's strange but now I created a new one and checked the zip by uncompressing before upload. Sorry for the neglect.
Dennis Jeffrey
Re: IGES export needed
Posted: Nov 7, 2009 5:47 PM   in response to: aspiring_design... in response to: aspiring_design...
  Click to reply to this thread Reply
AutoCAD is unitless. Is the part(s) about 111 mm or 111 inches in length.
--
Dennis Jeffrey, Autodesk Inventor Certified Expert
Autodesk Manufacturing Implementation Certified Expert.
Instructor/Author/Sr. App Engr. Tel. (260) 399-6615
http://teknigroup.com
aspiring_design...

Posts: 4
Registered: 11/06/09
Re: IGES export needed
Posted: Nov 7, 2009 6:25 PM   in response to: Dennis Jeffrey in response to: Dennis Jeffrey
  Click to reply to this thread Reply
All the measurements are in mm.

Thanks for help.
Jason Rhymes
Re: IGES export needed
Posted: Nov 9, 2009 3:16 PM   in response to: aspiring_design... in response to: aspiring_design...
  Click to reply to this thread Reply
Attachment TR BODY(3D ONLY).zip (985.6 KB)
JDMather

Posts: 11,611
Registered: 04/20/06
Re: IGES export needed
Posted: Nov 9, 2009 5:27 PM   in response to: aspiring_design... in response to: aspiring_design...
  Click to reply to this thread Reply
Attachment Box.zip (319.8 KB)
mould maker has asked for IGS models


You didn't indicate IGES Solids or IGES Surfaces. You might want to try this file.
aspiring_design...

Posts: 4
Registered: 11/06/09
Re: IGES export needed
Posted: Nov 10, 2009 1:08 PM   in response to: JDMather in response to: JDMather
  Click to reply to this thread Reply
Thanks... This one worked like charm!

Point your RSS reader here for a feed of the latest messages in all forums
Go Back Back to Thread List
Threads: [ Previous | Next ]