Thread: Light settings
Posts:
1
Registered:
11/04/09
|
|
|
|
Light settings
Posted:
Nov 4, 2009 2:43 PM
|
|
|
|
After adding various lights to a drawing for rendering purposes, it seems as though the "non-rendered" lighting changed. Whatever changed was not specific to that one file, but is now the effect I have in any drawing I open. I am having trouble locating a default setting and am unsure what the original setting even were to begin with. Because this problem is not file specific, any file I would attach would appear fine. Does anyone have any ideas?
Thanx!
|
|
|
|
|
|
|
|
Re: Light settings
Posted:
Nov 4, 2009 6:36 PM
in response to: JWAquatics
|
|
|
|
Check the ambient light setting.
The default intensity is 0.30
Paul
wrote in message news:6283463@discussion.autodesk.com...
After adding various lights to a drawing for rendering purposes, it seems as
though the "non-rendered" lighting changed. Whatever changed was not
specific to that one file, but is now the effect I have in any drawing I
open. I am having trouble locating a default setting and am unsure what the
original setting even were to begin with. Because this problem is not file
specific, any file I would attach would appear fine. Does anyone have any
ideas?
Thanx!
|
|
|
|
|
|
|
|
