Discussion Groups

All Discussion Groups » DWF

Thread: DWF Eplot (Whip! 3.1 Compatible Version)

Reply to this Thread Reply to this Thread Search Forum Search Forum Back to Thread List Back to Thread List

Permlink Replies: 7 - Last Post: Nov 19, 2009 8:07 AM Last Post By: ADR_Jerry Threads: [ Previous | Next ]
george.gilbert@...

Posts: 6
Registered: 05/19/09
DWF Eplot (Whip! 3.1 Compatible Version)
Posted: Oct 31, 2009 8:18 PM
  Click to reply to this thread Reply
Having recently upgraded to Autocad 2009 and now to Inventor/Autocad 2010 by DWF files when plotted to DWF Eplot (Whip! 3.1 Compatible Version) become corrupted. There was no problem with Autocad 2006 and previous versions when plotting to the original whip version. An example of the bad dwf file in a viewer is linked below. It should read the same as the PDF on the same page. Any help much appreciated.

http://www.lincolnsportsmans.com/Table_files/table.htm

George Gilbert
Dean Saadallah
Re: DWF Eplot (Whip! 3.1 Compatible Version)
Posted: Nov 2, 2009 12:46 PM   in response to: george.gilbert@... in response to: george.gilbert@...
  Click to reply to this thread Reply
while you wait...

DWFx format is now built into IE and requires no 3rd party app install like
your site tried to force on me when I clicked your link.

--
Dean Saadallah
http://LTisACAD.blogspot.com
--
ADR_Jerry

Posts: 33
Registered: 05/08/09
Re: DWF Eplot (Whip! 3.1 Compatible Version)
Posted: Nov 4, 2009 6:52 AM   in response to: george.gilbert@... in response to: george.gilbert@...
  Click to reply to this thread Reply
Thank you for your question.

Could you please attach your original DWG file and the corrupted DWF file to this thread for me to investigate this problem if it's possible?

Jerry
george.gilbert@...

Posts: 6
Registered: 05/19/09
Re: DWF Eplot (Whip! 3.1 Compatible Version)
Posted: Nov 16, 2009 5:17 PM   in response to: ADR_Jerry in response to: ADR_Jerry
  Click to reply to this thread Reply
Attachment Seating.dwf (8.9 KB)
DWF file created in Autocad 2009
george.gilbert@...

Posts: 6
Registered: 05/19/09
Re: DWF Eplot (Whip! 3.1 Compatible Version)
Posted: Nov 16, 2009 5:18 PM   in response to: ADR_Jerry in response to: ADR_Jerry
  Click to reply to this thread Reply
Attachment Seating plan.dwg (133.1 KB)
DWG file created in 2009
george.gilbert@...

Posts: 6
Registered: 05/19/09
Re: DWF Eplot (Whip! 3.1 Compatible Version)
Posted: Nov 4, 2009 3:59 PM   in response to: george.gilbert@... in response to: george.gilbert@...
  Click to reply to this thread Reply
Attachment Seating plan.dwg (132.6 KB)
Hi

Thanks for the qiick responce I have attached the two files that were created in Autocad 2009

Regards

George Gilbert
george.gilbert@...

Posts: 6
Registered: 05/19/09
Re: DWF Eplot (Whip! 3.1 Compatible Version)
Posted: Nov 4, 2009 4:01 PM   in response to: george.gilbert@... in response to: george.gilbert@...
  Click to reply to this thread Reply
Attachment Seating.dwf (8.9 KB)
Now the dwf file created in Autocad 2009 and printed using the Whip! 3.1 Compatible Version

Regards

George Gilbert
ADR_Jerry

Posts: 33
Registered: 05/08/09
Re: DWF Eplot (Whip! 3.1 Compatible Version)
Posted: Nov 19, 2009 8:07 AM   in response to: george.gilbert@... in response to: george.gilbert@...
  Click to reply to this thread Reply
Thank you for your feedback.

Unfortunately, we have tested your DWG file with AutoCAD2009, but couldn't reproduce this issue.

As this discussion board focuses on DWF questions and I believe that this situation may have more to do with some relationship to your specific configuration or environment and the ACAD installation, I recommend that you post this question to the dedicated AutoCAD discussion board found by following this link.

Please let me know if you have any further questions.

Point your RSS reader here for a feed of the latest messages in all forums
Go Back Back to Thread List
Threads: [ Previous | Next ]