Autodesk: Discussion Groups - Tool Pallettes 2010

Reply to this Thread

Search Forum

Back to Thread List

Replies: 2 - Last Post: Nov 7, 2009 6:06 PM Last Post By: hans@cadteam.nl

Threads: [ Previous | Next ]

pascalvanderneut

Posts: 35
Registered: 09/11/06

Tool Pallettes 2010
Posted: Oct 30, 2009 10:04 AM

I am having troubles with the Tool Pallettes in AE 2010.
In the older versions you can open the Tool Palettes in AE and than you will only get Electrical tools.
When you open it in AE2010, you get everything accept Electrical tools like in AE2009.

I hope there is a way to get the 'old' Tool Palettes.
Please help.

Thanks in advance,

Pascal

ricardo_baez

Posts: 10
Registered: 08/19/09

Re: Tool Pallettes 2010
Posted: Oct 30, 2009 2:49 PM

in response to: pascalvanderneut

Hi,

The following link will show you the solution to your problem.

http://discussion.autodesk.com/forums/thread.jspa?messageID=6161866&#6161866

Ricardo

pascalvanderneut wrote:

I am having troubles with the Tool Pallettes in AE 2010.

In the older versions you can open the Tool Palettes in AE and than you will only get Electrical tools.

When you open it in AE2010, you get everything accept Electrical tools like in AE2009.

I hope there is a way to get the 'old' Tool Palettes.

Please help.

Thanks in advance,

Pascal

hans@cadteam.nl

Posts: 1
Registered: 05/18/09

Re: Tool Pallettes 2010
Posted: Nov 7, 2009 6:06 PM

in response to: ricardo_baez

Hi Pascal,

If you looked by the options of AutoCAD, you will find the “Tool Palettes File Locations”, the path installed is “….\Support\ToolPalette” if you change this to “….\Support\AeToolPalette” you have changed your Tool Palettes to the new AutoCAD Electrical 2010 Tool Palettes.

Regards,

Hans Knol
Aceri / CADTEAM

Back to Thread List

Threads: [ Previous | Next ]