|
I wasn't able to reproduce this. Each time I inserted a new wire number it
was centered. Can you post the .wdp file and the .dwg file where you are
having this issue? If you can't post it can you send it to me directly at
pat.murnen@autodesk.com. The only time it didn't center was when I had
scooted the wire number over and then reinserted. Under these circumstances,
when there is an existing wire number, it just updates the value and does
not change its location.
What version of AcadE are you using?
Pat Murnen
wrote in message news:6272830@discussion.autodesk.com...
When using the 3 phase wire numbering function, the wire number placement is
not centering in the wire. For some reason the wire number keeps getting
justified to the very left of the wire. I have checked many times in the
Drawing Properties -> Wire Numbers tab that "center" is selected for the
wire number placement but Acad seems to ignore this. The 3 phase wire number
function has worked perfect for me in the past but all of the sudden, now
the wire numbers get placed on the left of the wire regardless if I have
"center" selected or not. Something must have changed but I haven't modified
any other properties or settings, to my knowledge. Has anyone ever heard of
this? I just recently updated my Acad version with the latest patch and that
didn't fix it either. Also, I dont have any issues with the standard Wire
Numbers function. That works very well and the wire placement is correct,
but not for 3 phase. Any help would be appreciated. Thanks.
|
