Discussion Groups

All Discussion Groups » Autodesk DWF Viewer

Thread: DWF of Presentation-Parts revert to original position

Reply to this Thread Reply to this Thread Search Forum Search Forum Back to Thread List Back to Thread List

Permlink Replies: 8 - Last Post: May 3, 2006 1:26 PM Last Post By: DewayneH
DewayneH

Posts: 115
Registered: 10/20/04
DWF of Presentation-Parts revert to original position
Posted: Apr 19, 2006 4:37 PM
  Click to reply to this thread Reply
I also posted this same issue on the Inventor Discussion on on April 10. I have had absolutely no reply, I assume it has to do with the release of 11.
I create a dwf of an Inventor ipn and everything looks fine, with the exception of a few parts. These parts have been exploded in the ipn but when the dwf is created they are in the original position they were in before it was exploded.
Scott Sheppard ...
Re: DWF of Presentation-Parts revert to original position
Posted: Apr 19, 2006 4:40 PM   in response to: DewayneH in response to: DewayneH
  Click to reply to this thread Reply
Can you send me the ipn? I will try to generate a DWF and see what I get.

wrote in message news:5147434@discussion.autodesk.com...
I also posted this same issue on the Inventor Discussion on on April 10. I
have had absolutely no reply, I assume it has to do with the release of 11.
I create a dwf of an Inventor ipn and everything looks fine, with the
exception of a few parts. These parts have been exploded in the ipn but when
the dwf is created they are in the original position they were in before it
was exploded.
DewayneH

Posts: 115
Registered: 10/20/04
Re: DWF of Presentation-Parts revert to original position
Posted: Apr 19, 2006 6:47 PM   in response to: Scott Sheppard ... in response to: Scott Sheppard ...
  Click to reply to this thread Reply
Attachment Ipn Dwf Issue.zip (1.3 MB)
Because of the file size I cut out most all the unecessary parts. Within the parts that you'll see, there are three of them that refuse to publish to dwf in the right position.
Scott Sheppard ...
Re: DWF of Presentation-Parts revert to original position
Posted: Apr 21, 2006 4:05 PM   in response to: DewayneH in response to: DewayneH
  Click to reply to this thread Reply
I have your file. I don't have Inventor on my machine right now. I will get
back to that next week.

wrote in message news:5147748@discussion.autodesk.com...
Because of the file size I cut out most all the unecessary parts. Within the
parts that you'll see, there are three of them that refuse to publish to dwf
in the right position.
Scott Sheppard ...
Re: DWF of Presentation-Parts revert to original position
Posted: May 2, 2006 8:05 PM   in response to: DewayneH in response to: DewayneH
  Click to reply to this thread Reply
Attachment Ipn Dwf Issue.dwf (49.3 KB)
Here is the DWF I generated.

wrote in message news:5147748@discussion.autodesk.com...
Because of the file size I cut out most all the unecessary parts. Within the
parts that you'll see, there are three of them that refuse to publish to dwf
in the right position.
DewayneH

Posts: 115
Registered: 10/20/04
Re: DWF of Presentation-Parts revert to original position
Posted: May 3, 2006 12:07 PM   in response to: Scott Sheppard ... in response to: Scott Sheppard ...
  Click to reply to this thread Reply
Did you have any issues? The reason I ask is because all I have is a blank screen. I receive this warning:

This DWF file is a newer version of the DWF file format and may contain features that are not viewable with this version of DWF Viewer.

(06.20
1 : 0)

I downloaded the lasted version of DWF Viewer Yesterday. Any suggestions?
Scott Sheppard ...
Re: DWF of Presentation-Parts revert to original position
Posted: May 3, 2006 1:20 PM   in response to: DewayneH in response to: DewayneH
  Click to reply to this thread Reply
Sorry. I published the DWF using the Inventor 11 DWF Extension which is in
beta now
(http://dwf.blogs.com/beyond_the_paper/2006/05/marconi_beta_un.html). As
such, it requires Autodesk DWF Viewer 7 or Autodesk Design Review 2007 which
are also in beta
(http://dwf.blogs.com/beyond_the_paper/2006/04/amazon_beta_und.html). At
least you know that your issue is corrected in the Autodesk Inventor 11
update.

wrote in message news:5162023@discussion.autodesk.com...
Did you have any issues? The reason I ask is because all I have is a blank
screen. I receive this warning:

This DWF file is a newer version of the DWF file format and may contain
features that are not viewable with this version of DWF Viewer.

(06.20
1 : 0)

I downloaded the lasted version of DWF Viewer Yesterday. Any suggestions?
DewayneH

Posts: 115
Registered: 10/20/04
Re: DWF of Presentation-Parts revert to original position
Posted: May 3, 2006 1:26 PM   in response to: Scott Sheppard ... in response to: Scott Sheppard ...
  Click to reply to this thread Reply
So I take it with Inv 11 there should be no problems.
This is not so pressing that it can't wait for me to install 11.
Thanks for taking a look at it.
DewayneH

Posts: 115
Registered: 10/20/04
Re: DWF of Presentation-Parts revert to original position
Posted: Apr 19, 2006 7:13 PM   in response to: Scott Sheppard ... in response to: Scott Sheppard ...
  Click to reply to this thread Reply
Something just occurred to me that I thought I should pass on. All the parts that have this issue are assemblies, although there are assemblies in this particular presentation that exploded just fine.

Point your RSS reader here for a feed of the latest messages in all forums
Go Back Back to Thread List